Radiometric, Non-contact Level Measurement for Liquids or Solids

Radiometric level detection
(RONAN)

Radiometric level measurement, using a very low gamma level source, is designed to deliver outstanding performance in a wide range of difficult applications and process conditions for both liquids and bulk solids which include the most dangerous materials such as caustic, toxic, corrosive, explosive, and carcinogenic irrespective of their viscosity and temperature.

These level gauges meet “As-Low-As-Reasonably-Achievable” (ALARA) guidelines. Source activity is customized depending on vessel and process parameters such as diameter, wall thickness, material, and measurement span to ensure optimum sensitivity, economy and safety while keeping the source activity to a minimum.

Sources and Detector Mounted
External to Vessel

An exclusive “Radiation Low Level” (RLL) source holder uses up to 100 times less gamma energy than comparable gauges, and is the only source holder recognized by the NRC to be so safe that it does not require the stringent documentation, training or handling procedures of other systems.

Operation

Radiometric level measurement provides a safe and efficient, non-contact method to measure liquids or solids in harsh process environments. Each system consists of a gamma source, detector and microprocessor.

• The gamma source, typically mounted external to the vessel emits energy through the vessel walls collimated in a direction towards the detector mounted on the opposite side of the vessel. The gamma energy reaches the detector when the vessel is empty. As the process level rises in the vessel, the gamma energy reaching the detector will decrease in an inversely proportional relationship to the level. 
• The detector measures the level of energy and sends a proportional signal to the microprocessor. 
• The microprocessor linearizes, filters, and correlates this signal to a level measurement. 

The entire system is mounted external to the vessel and can be easily installed and maintained while the process is running ... without expensive down time, vessel modifications or chance of accidental release.

Applications

Low Level Source and Detector
Mounted External to Vessel

• Radiometric level detection
• Low Level Source and Detector
• Mounted External to Vessel
• Solids or Liquid Measurement 
• Measurement Not Affected by: 
• Internal Obstructions. i.e. Agitators Extreme Process Temperatures 
• Caustic Processes 
• Violent Product Flow 
• Sterile Process 
• Changing Process 
• Variable Product Flow 
• Automatic Compensation for Vapor Density Changes 
• Automatic Compensation for Foam or Gasses 
• Automatic Compensation for Process Build-Up 
• Detectors Contoured to the Shape of Vessels 
• Upgrade Utilizing Existing Sources

Features and Benefits 

• Accurately Measures the Most Complex Processes 
• Solid Crystal or Flexible Scintillating Fill- Fluid 
• Excellent Measurement Reliability due to Proprietary Filtering Technology 
• Level Detection of Multiple Interfaces 
• Low Maintenance / No Component Wear 
• Auto-Calibration

For more information in Eastern Pennsylvania, New Jersey, Metro New York or Delaware contact:
Miller Energy by visiting https://millerenergy.com or by calling 908-755-6700 in New Jersey, or 610-363-6200 in Pennsylvania.

Yokogawa Users Conference 2018

The 2018 Yokogawa Users Conference and Exhibition – North America brings together hundreds of industry experts and valued users to exchange knowledge, share best practices and innovative solutions to real-life day-to-day challenges.

• Sept. 10-13, 2018
• Renaissance Orlando at Seaworld, Florida

Register here: https://www.yokogawausersconference.com

Attendees experience unique and exciting opportunities to learn more about Yokogawa's solutions and how they can be applied to achieve safe, reliable, and profitable operations.

• Network: Develop a knowledge-sharing session within a diverse network of users and mingle with industry peers
• Discover: Gain insights into the latest industry practices and trends from the visionary leaders across prestigious major international and national companies
• Innovate: Learn more about new products, innovations, and user experiences on how they maximize profit potential and improve their plant process while dealing with complex problems

Happy 4th of July from Miller Energy!

“America is another name for opportunity. Our whole history appears like a last effort of divine providence on behalf of the human race.”

Ralph Waldo Emerson

Industrial Refractometers Used in Process Control

Refractometer for pharmaceutical use (K-Patents).

Part physics, part material science and part chemistry, refractometry is the process which measures the composition of known substances by means of calculating their respective refractive indexes (RI). RIs are evaluated via a refractometer, a device which measures the curve, or refraction, resulting when the wavelength of light moves from the air into and through a tested substance. The unitless number given by the refractometer, usually between 1.3000 and 1.7000, is the RI. The composition of substances is then determined when the RI is compared to a standard curve specific to the material of the substance.

Process refractometers provide the analysis to quickly, reliably, and very accurately identify a sample and determine it's concentration and purity levels. They measure the refractive index and temperature of flowing liquids, and apply mathematical functions to determine the concentration of dissolved solids.

Common industrial refractometer applications are:

• Calculating beverages’ amount of sugar dissolved is water.
• In commercial food applications such as juice production or tomato processing, refractometers are used to measure degrees Brix (Tthe Brix scale relates refractive index to sugar concentration, and is a key way to maintain consistency).
• In the pharmaceutical industry, process refractometers are used to monitor and control concentration levels during supersaturation, a critical process in crystallization.
• In pulp and paper production, process refractometers for measuring dissolved solids in black and green liquor during the chemical recovery process.

Equipment manufacturers have developed numerous refractometer configurations tailored to specific each use and application. Each has a set of features making it the advantageous choice for its intended application. Product specialists can be invaluable sources of information and assistance to potential refractometer users seeking to match the best equipment to their application or process.

For more information on industrial refractometers, contact Miller Energy by visiting https://millerenergy.com or by calling 908-755-6700 in New Jersey or 610-363-6200 in Pennsylvania.

Laboratory Flame Testing of Industrial Pressure Gauges: Wika vs. Competitor

Laboratory flame testing of industrial pressure gauges. Manufacturer Wika versus a competitor. The test is structured in (3) stages: a 10 second burn, a 30 second burn, and then a one minute burn. The Wika gauge maintains its reading, does not melt, and does not continue to burn.

https://millerenergy.com
New Jersey 908-755-6700
Pennsylvania 610-363-6200

Flow & Pressure Instrumentation for Biopharmaceuticals & Life Sciences

Producing biopharmaceuticals is one of the world’s most demanding manufacturing processes.

Brooks Instrument’s mass flow and pressure control technology helps maximize cell culture yields and control bioprocess costs. Their flow
and pressure controllers set global standards for reliability, repeatability and long-term stability.

Brooks Instrument mass flow controllers (MFCs) satisfy key biotechnology research and production requirements:

• Tight control of DO and pH during experiments and production
• NO unplanned downtime due to high cost of losing a batch or experiment
• Ability to rapidly diagnose and resolve issues with bioreactors or fermentation equipment
• Cost-effective method for adhering to regulatory requirements
• Excellent technical support and rapid response for equipment service

To read the entire Flow & Pressure Instrumentation for Biopharmaceuticals & Life Sciences guide from Brooks Instrument, download it here. Alternatively, browse the embedded document below.

Flow & Pressure Instrumentation for Biopharmaceuticals & Life Sciences from Miller Energy, Inc.

What Advantages Do Displacer Transmitters Have Over Differential Pressure Level Transmitters?

Displacer
Transmitter
(Magnetrol)

Many technologies have been available over the years have helped the process control industry with level measurement. From basic mechanical float-operated level switches, the process automation industry has been developing new technologies to make industry safer and more efficient.

An example of a "tried and true" technology that was commonly used in the process automation industry is the DP (differential pressure) level transmitter. First introduced in the 1950s, DP transmitters measures the hydrostatic (head) pressure of a liquid in a tank or vessel and interprets this as level, based on the density/specific gravity of the liquid and programmed in by the user. A newer, alternative technology to DP transmitters is the displacer level transmitter, a device also based on specific gravity. While they both are dependent on specific gravity, they are significantly different in areas of installation, accuracy, and maintenance requirement.

Application/Calibration

Applying a DP transmitter or displacer level transmitter requires experience and there are many factors to be considered. Here are a few:

DP transmitters use inferential measurement to determine level measurement from the hydrostatic pressure.  Despite requiring the specific gravity variable having to be programmed into the transmitter electronics, the level displacer transmitter is in contact with the process media and the level measurement is direct.

DP transmitters requires time consuming and expensive calibration/re-calibration if any of the set-up parameters change or if the same DP transmitter is used on different materials in the same tank.
Displacer transmitters only require two variables to be programmed (temperature and specific gravity), making it easier when running multiple products in the same tank.

Many displacer transmitters do not require liquid to be present for calibration. They are programmed (wet or dry) using software. A huge time and money saving over DP transmitters.

Mounting

The physical mounting of DP transmitters is limited, which can in some situations can become downright problematic. DP transmitters require (2) side-mounted entry locations on the vessel or tank, with one having to be near the bottom. As a general rule, the fewer the entry points of a tank or vessel, the better, because of leakage. Tank bottom entries all the more so.

Displacer transmitters are mounted to meet the requirements of the application and do not require a connection at the bottom of the tank.

Installation Cost

While DP transmitters have a lower unit cost, adding ancillary components such as tubing and heat tracing can quickly "level" the installation cost playing field. Furthermore, don't discount the time cost savings when setting up, calibrating and re-calibrating displacer transmitters.

Temperature Range

DP transmitters have a normal operating temperature of up to 250°F, with an upper limit of 650°F when special options are specified.

Displacer transmitter can be used up to 850°F, very helpful particularly with level measurement in a hot oil separator application.

There are many options and variants to accommodate industrial level applications. Share your level application challenges with instrumentation specialists, leveraging your own knowledge and experience with their product application expertise to develop the most effective solution.