Bimetallic Thermometers With Adjustable Angle and Rotating Head Make Installation Simple

Bimetallic Thermometer
Courtesy US Gauge

A bimetallic thermometer relies on the deformation of a bimetal spring or strip in response to a given temperature. The mechanical deformation is transformed into rotational movement of the indicating needle on the instrument face, where the corresponding temperature can be read by a technician or operator. This design principle has been in use throughout laboratories, kitchens, and industry for many years and has proven to be predictably accurate, stable, and rugged.

The major advantages of the bimetallic thermometer are its relative cost, ease of use, and ability to function without any power source. While this class of instruments provides operability up to +1000°F, the operating principle does not tend to provide similar accuracy at very low temperatures.

When applying dial faced thermometers, the main considerations beyond selecting the appropriate temperature range are the diameter of the dial and the mounting arrangement. US Gauge, an Ametek brand, provides a line of bimetallic thermometers for industrial process applications with a large degree of built-in flexibility to make selection and installation very simple. Three and five inch dial faces are offered, along with a selection of temperature ranges and stem lengths. The stem can be adjusted to almost any angle to provide good view of the face, and the head can be rotated over 180°.

Provided just below is a data sheet and description of the ADJ Series from US Gauge. Share your instrumentation challenges with the product application experts at Miller Energy. Combine your process knowledge with their product expertise and develop the the best solutions.

Industrial Bimetallic Thermometers: 3 and 5 Inch Adjustable Angle from Miller Energy, Inc.

Specialty Enclosures Complete Instrument and Equipment Installations

Analyzer Cabinet
Courtesy Intertec

Industrial environments present a wide range of challenges to the process designer or operator looking to install sensitive instrumentation or controls. Not all devices come with integrated enclosures suitable for all environments. The responsibility for properly housing equipment, controllers, and other instruments can fall on the process designer or operator.

There are numerous considerations in the design and selection of an enclosure, especially when the application drifts beyond the range of commonly available sizes, configurations, and materials of construction. Here are some thinking points for you.

Instrumentation safely housed
while clearly visible to operator
Courtesy Intertec

• Ignition Hazard Level: Areas or locations with hazardous classifications will require special enclosure designs and features for compliance.
• Climate: If outdoors, consider the range of local weather conditions and their potential impact on the longevity and performance of the enclosure, its ability to protect whatever is housed within.
• Access: Do operators need quick access to contained equipment? If so, appropriate latches or other closures that allow interior access without a need for tools may be in order. Security concerns may warrant locking capability. A clear panel installed in a door can provide visual access to instruments safely contained within the enclosure.
• Corrosion: Wet environments or locations near seawater or other corrosive elements can call for upgraded coatings or materials of construction that will prolong the useful life of the enclosure.
• Enclosure Cooling or Heating: Depending upon the surrounding temperature or the characteristics of equipment housed in the enclosure, heat removal or supplementing accessories may be integrated into the enclosure design.
• Size: Consideration given to possible additions to the original array of instruments or devices to be contained can save substantial time and money if a future expansion is in order. The size of the enclosure should provide for any clearance  recommended by device  manufacturers for their installed components. Provide adequate servicing space for field technicians to perform any necessary tasks related to housed equipment.
• Penetrations: Conduit or other penetrations required for proper operation and installation can be accomplished more precisely, and often at a lower cost, in the factory than in the field. Carefully laying out and coordinating the installation of connections to the enclosure can save time and trouble in the field.

Certainly, there are numerous other elements of enclosure design that may be taken into account for differing installation requirements. Share your project requirements with application specialists and reach the best solutions by combining your process knowledge with their product expertise.

Simplifying Plant Safety Instrumentation

Series One Safety Transmitter and Switch
Courtesy United Electric

Safety implementation typically is accomplished by a group that includes plant instrument engineers and technicians. They are charged with developing simple and reliable solutions that increase safety and reduce risk. Safety related events can involve the question of when to shut a process down. These decisions can hinge on the level of key process variables such as flow, level, temperature and pressure. All must be within their specified range at various locations throughout the process, whether within chemical and petrochemical plants, refineries and power plants, or other processing operations. Critical points of measurement can include anything from process vessels to eye wash stations.

For such point safety applications, a properly designed and implemented digital switch with self-diagnostics can be an important part of the answer. As an element of a multiple technology solution, a digital switch-based approach can help eliminate common-mode failures, significantly improve response time, achieve needed safety integrity levels (SILs), and simplify plant safety instrumentation.

United Electric Controls has authored a white paper entitled "Simplifying Plant Safety Instrumentation" that provides some insight into deployment of safety controls. The entire white paper is included below and will prove to be useful reading. More detailed product and application information is available from product specialists. Combining their product expertise with your process knowledge will produce the best solutions.

Simplifying Plant Safety Instrumentation from Miller Energy, Inc.

"Bubbler Method" Liquid Level Measurement

An accurate pressure transmitter
is an integral part of  a liquid level
measurement system using the
"Bubbler Method"
Courtesy Brooks Instrument

Measuring liquid level in a tank or vessel can be accomplished in a number of ways, all of which require some arrangement of instrumentation to either infer the liquid level from the measurement of a related physical property, or directly deliver the liquid level visually using a scaled gauge arrangement. One indirect method of level measurement is often referred to as the bubbler method, so named because it employs a purging gas that continually vents from the bottom of a tube extending into a tank of liquid. Through a simple apparatus, the level of a liquid can be inferred by the amount a back pressure exerted upon the gas flowing through the tube.

Probably the greatest advantage of this method of liquid level measurement is that the liquid does not contact the sensing instrumentation. The only portion of the apparatus in contact with the liquid is a tube immersed into the tank. Basically, a purge gas flows through the immersion tube and may bubble out the immersed end of the tube, which is open to allow the contained liquid to exert a hydrostatic pressure on the purge gas. The back pressure on the gas that is exerted by the liquid contained within the tank will vary directly with the depth of the liquid. The back pressure can be correlated to a liquid level. Further calculations, which would include the tank shape, dimensions, and the liquid density can provide an indication of the volume and mass of the liquid. Here is an illustration of the setup, provided courtesy of Brooks Instrument, globally recognized leader in flow and pressure measurement and control. The illustration is from Brooks' January blog article.

Bubbler Method Tank Level Measurement Apparatus, showing application of some Brooks Instrument devices.

Below are data sheets detailing the components used in the system to control and measure the gas flow, and measure the back pressure on the immersion tube. There are other components needed for a complete system, but they are fairly generic in nature and easily obtainable. Contact a flow and level measurement specialist with your application challenges and work with them to produce effective solutions.

Bubbler Method Liquid Tank Level Measurement Instruments from Miller Energy, Inc.

Low Cost Radar Level Transmitter For Industrial Process Applications

Magnetrol Model R82 Radar Level Transmitter

With its ability to reliably detect tank liquid surface level under conditions that prove challenging to other methods, radar technology generally provides an operational advantage over other non-contact level measurement options. Historically, the cost of radar level transmitters for industrial process control applications has hindered their success as a unit of choice for some installations. Magnetrol has changed that imbalance with their recent introduction of a lower cost radar level transmitter for tough applications.

The Model R82 provides radar performance at a price point comparable to competitive ultrasonic units, but maintains the performance advantage inherent in a radar based device. The unit utilizes pulse burst radar technology at 26 GHz, employing advanced signal processing to filter out false echos produced by a range of in-tank conditions that can produce false readings from ultrasonic units.

The short video below provides a closer look at the R82 and its performance advantages. Technical data sheets and any application assistance you may need is available from product specialists. Share your level measurement and control challenges with them and work toward the best solution.

Yokogawa Users Conference and Exhibition is Coming

Yokogawa is presenting its 2016 Users Conference and Exhibition in Orlando, Florida. The event runs from October 3 through October 6 and will be held at the Renaissance Orlando at SeaWorld hotel. Included in the conference agenda are informative technical sessions, training workshops, panel discussions, hands-on demonstrations, essential application sessions, and daily keynote speakers. The opportunities for networking and learning are truly unique and rewarding for those involved in process automation and control.

There is currently a call for presentations, seeking out those who wish to share their applications and challenges. Learn more about the conference and register at the event website.

Yokogawa Users Conference and Exhibition from Miller Energy, Inc.

Yokogawa Publishes New Collection of Case Studies in Process Automation and Control

Yokogawa, an internationally recognized process automation and control provider, strives for customer satisfaction through operational excellence, bringing long-term success to its customers. Now available are collections of actual cases in which Yokogawa helped leading companies in a variety of industries address specific challenges and achieve their goals. The new e-books were redesigned and subdivided into six sectors including LNG, Oil & Gas, Chemical, Pharmaceutical, and Renewable Energy.

Browse the e-books online for insight into the breadth and depth of Yokogawa's capabilities and their commitment to their customer's success. Depending on your screen size, you may need to scroll down the page to see the e-books at the link. At e-books, you can browse using the online reader, or download them as a PDF file.

Share you process control challenges with a Yokogawa representative and expect the best solutions.