Showing posts with label Pennsylvania. Show all posts
Showing posts with label Pennsylvania. Show all posts

Critical Ethylene Level and Flow Application Brochure

Critical Ethylene Level and Flow Applications

In ethylene plants, balancing environment, health, and safety is essential while maximizing productivity.

Level and flow instrumentation will assist in preventing loss of primary containment and maintaining a safe environment inside of the tank. That’s critical, because incident consequences are significant, with the direct cost of a work-related death of $1M and indirect costs approximately 4 times greater. In addition, there is the lasting damage to your brand reputation and the compromised safety of the local community. Instrumentation can also assist in maximizing productivity, including interface type measurement in some of the harshest environments.

This brochure contains a wide spectrum of Magnetrol® and Orion Instruments® level and flow products that conform to the latest safety standards, including SIL requirements, to assist in the most critical applications in ethylene plants.


For more information about Magnetrol and Orion Instruments products contact Miller Energy, Inc. Call them at 800-631-5454 or visit their website at https://millerenergy.com.

The Vaisala K-PATENTS PR-43A Sanitary Process Refractometers for Food, Beverage & Dairy Industries

Vaisala K-PATENTS® Sanitary Process Refractometers PR-43-AC for hygienic installations in small pipe line sizes of 2.5 inch and smaller; PR-43-AP for hygienic installations in large pipes, tanks, cookers, crystallizers and kettles and for higher temperatures up to 150°C (300 °F); and the PR-43-APT for flush mounting installations in cookers, cooling crystallizers and other vessels that have scrapers or mixers.

Sanitary Refractometer Applications:

Extraction, evaporation, brewing, distilling, sugar dissolving, blending, filling. Alcohol, rum, whiskey, brandy, vodka, molasses, liquors, cider, alcoholic beverages, pre-mixed liquors. Beer and malt beverages, wort, cut beer, root beer. Juices, blended vegetable and fruit juices and nectars, still drinks, vegetable and juice concentrates, iced tea and coffee, instant coffee and tea. Soft drinks, energy and sport drinks, beverage base. Wines, grape must.

Sanitary Refractometer 3A Approval:

The Sanitary refractometer PR-43-A is Sanitary 3-A approved to meet the highest hygiene requirements of food production. The 3-A Symbol assures that the Sanitary Refractometer

PR-43-A conforms to 3-A Sanitary Standard Number 46-04 for Refractometers and Energy-Absorbing Optical Sensors for Milk and Milk Products and it has passed the independent Third Party Verification inspection for 3-A Symbol authorization.

For more information about Vaisala K-PATENTS products in Metro New York, New Jersey, Pennsylvania, Delaware, and Northern Ohio contact Miller Energy, Inc. Call them at 800-631-5454 or visit their web site at https://millerenergy.com.

Crane Duo-Chek® Valves from Miller Energy, Inc.

Crane Duo-Chek® high performance non-slam check valves are available in the sizes, pressure classes and configurations required to meet the most demanding of applications. 

The Crane Duo-Chek® wafer valve design is generally stronger, lighter, smaller, more efficient, and less expensive than conventional swing check valves. Its design meets API 594, width is approximately one fourth the face to face dimension and is 15% to 20% the total weight, on most popular sizes, making them less expensive than a swing check valve. It is much easier to install between standard gaskets and line flanges. The savings compound during installation due to ease in handling and only one set of flange studs is required. Therefore, it is more cost-effective to install, and also to maintain.

For more information about Duo-Chek®  valves, contact Miller Energy, Inc. Call 800-631-5454 or visit  https://millerenergy.com.


Liquid Interface Level Measurement Using Guided Wave Radar, Magnetic Level Gauges, Float & Displacer, Thermal Dispersion, and RF Capacitance

Liquid Interface Level Measurement

The need for interface measurement arises whenever immiscible liquids - those incapable of mixing - reside within the same vessel. The lighter material rises to the top and the heavier material settles at the bottom. In oil production, for example, water or steam is used to extract oil from a well. Well fluids then route to production separators where they settle into their primary constituent parts as a water-hydrocarbon interface. Water may also be used as a transport medium or a cleaning agent and forms an interface with an allied material which is later extracted.

Knowing the position of a process interface is necessary for maintaining product quality and operations efficiency. The interface is measured and controlled by precision level switches and transmitters. Though at least 20 different types of liquid level measurement devices are in service today, only a very few are suitable for accurate and reliable interface measurement. Grouped by their operating technologies, these include Buoyancy (Floats and Displacers), RF Capacitance, Thermal Dispersion, Radar, and Redundant Technologies (those combining two measurement technologies in one instrument).

Interface Level Measurement
The five leading interface measurement technologies in use today are Guided Wave Radar, Magnetic Level Gauges, Float & Displacer, Thermal Dispersion, and RF Capacitance. These five leading interface measurement technologies in use today are discussed in the technical bulletin titled "Liquid Interface Level Measurement" and produced by Magnetrol International.


For more information on any industrial level control application, contact Miller Energy. Call them at 800-631-5454 or visit their website at https://millerenergy.com.

Industrial Valve Automation from Miller Energy, Inc.

Miller Energy's valve automation philosophy is to design, build, and install automated valve packages that improve process efficiency and reliability. We deliver customized actuation products and services that suit your criteria and specifications. Our automated valve packages can be designed to perform basic service, or for specific unique applications where challenging or severe application criteria exist. Miller Energy has relationships with the most highly regarded brands of industrial valves, actuators and controls. Beyond that, Miller's team of valve experts have years of experience and can help you find solutions to fit your specific requirement. From specification, to start-up, through preventive maintenance, Miller Energy is there with you throughout the lifetime of your automated valve.

Miller Energy Valve Automation

  • Quarter-turn Ball, Butterfly and Plug Valves
  • Linear Gate, Knifegate, and Globe Valves
  • Pneumatic Actuators
  • Electric Actuators
  • Engineered Brackets and Couplings
  • Valve Positioners
  • Limit Switches
  • Solenoid Valves
  • Valve Communication Packages

For more information, contact Miller Energy, Inc. Call them at 800-631-5454 of visit their website at https://millerenergy.com.

White Paper: Improving Health and Safety with Magnetic Level Indicators in Ammonia Refrigeration Applications

Magnetic Level Indicators in Ammonia Refrigeration
Anhydrous ammonia is a versatile commodity in many manufacturing applications, including cold storage and food processing facilities. In comparison, anhydrous ammonia raises a range of safety and environmental issues to be addressed when determining some form of process instrumentation. Traditionally, visual level indication of anhydrous ammonia was obtained using sight glasses. This white paper discusses key areas in the ammonia refrigeration process where magnetic level indicators (MLIs) can provide a safer , more reliable method of level measurement over conventional technologies.

The goal of this document is to highlight the benefits of MLIs that will lead to improved personnel safety , reduced risk of fugitive emissions, reduced environmental impact, and reduced maintenance costs in large commercial and industrial ammonia refrigeration systems.


Contact Miller Energy for any industrial level control application. Call  800-631-5454, or visit their website at https://millerenergy.com.

The McCrometer FPI Mag Full Profile Insertion Flow Meter


The McCrometer FPI Mag is ideal for capital or maintenance projects, retrofits and sites never before metered. The unique combination of accuracy, ease of installation, and total cost savings make the FPI Mag the perfect choice for a wide range of Municipal and Industrial Applications.

The FPI Mag has no moving parts and a single-piece design. The multi-electrode water flow sensor contains nothing to wear or break and is generally immune to clogging by sand, grit or other debris. The FPI Mag is available with forward-flow only or bi-directional measurement for line sizes from 4 to 138 inches.

The sensor body is made from heavy-duty 316 stainless steel for maximum structural integrity and is hermetically sealed and protected by NSF certified 3M fusion-bonded epoxy coating.

The FPI Mag is rated for Hazardous Locations:
- Class 1, Division 2, Groups A-D, T5
- Class 2, Zone 2, Groups A-D, T5

For more information on the FPI Mag contact Miller Energy, Inc. Call them at 800-631-5454 or visit their site at https://millerenergy.com.


Understanding Safety Integrity Level (SIL)

Safety integrity level (SIL)

Safety integrity level (SIL)
Nothing is more important than safety to the process control industries. High temperature and pressure, flammable and toxic materials are just some of the issues faced on a daily basis. Reliability is a key component of safety; the more reliable the device, the safer the critical process.

Safety integrity level (SIL) is defined as "relative level of risk-reduction provided by a safety function, or to specify a target level of risk reduction." SIL ratings are applied in accordance of frequency and the severity of the hazard. These ratings determine the level of performance required to achieve and maintain safety, as well as the probability of failure.

There are four SIL levels; SIL 1, SIL 2, SIL 3, and SIL 4. These SIL levels relate to the risk of failure - a higher the SIL rating poses a higher risk of failure, in turn requiring stricter safety requirements.

Magnetrol, a leading manufacturer of innovative level, flow and volume controls for the process industries has put together this excellent technical note to help you better understand Safety Integrity Level.



Miller Energy, Inc.
https://millerenergy.com
800-631-5454

White Paper: Using Digital MFC Capabilities to Improve Bioprocessing Results Miller Energy

Biomanufacturing relies on numerous pieces of equipment working in concert to produce life-altering therapeutics. The equipment relies on various subsystems to achieve the desired results. In a bioreactor, one of the most essential subsystems provides gas management for the gases necessary for cellular metabolism. At the heart of the gas management subsystem is the thermal mass flow controller (MFC), a component that precisely measures and controls the delivery of gases to the bioprocess.

This white paper, courtesy of Brooks Instrument, discusses mass flow controller data capabilities in relation to a broader biomanufacturing capital asset management.


For more information on Brooks Instrument products, contact Miller Energy. Call them at 800-631-5454 or visit their website at https://millerenergy.com.

Programming the UE One Series Hybrid Transmitter-Switches


The United Electric Controls One Series electronic pressure and temperature transmitter-switches are designed to provide transmitter, switch and gauge functions all-in-one rugged enclosure that can withstand the rigors of harsh and hazardous environments. Available in Type 4X enclosures approved for intrinsic safety, flameproof and non-incendive area classifications, these hybrid transmitter-switches have a fully adjustable set point and deadband and 0.1% repeatability. This video provides a quick tutorial on how to set up the One Series.

For more information, contact Miller Energy. Call them at 800-631-5454 or visit their web site at https://millerenergy.com.

Don’t Let Valves Come Between You and Accurate Flow Measurement

Getting valves and flow meters to work together is sometimes a challenging task within industrial water and wastewater applications. Valves tend to create the kind of irregular media flow patterns in pipelines that make it a real challenge to achieve accurate flow measurement of liquids, gas or steam. That’s why many types of popular liquid flow meters require straight pipe runs.

Unfortunately, the nature of the process or the kind of space required for long straight runs of pipe is often an impossible luxury in many of today’s plants.



How Valves Create Flow Disturbances


Depending on a pipeline’s flowing media (liquid, gas or steam), the process pressures and the process temperatures, the fluid flow dynamics within a pipeline can vary widely. The ideal pipeline configuration for the accurate measurement of flow with nearly all of the industry’s most popular flow sensors is a straight pipe with consistent media conditions Many processes by their very nature, however, tend to be unstable and create irregular flows within a pipeline all by themselves.

Plant layouts, especially expansions and retrofits, also tend to create less than optimum pipeline conditions for the measurement of flow. The addition of valves, pumps, elbows and other equipment into the pipeline create media swirling and other effects that can result in irregular flow profiles that will reduce flow meter measurement accuracy and repeatability. That’s why many flow meter manufacturers recommend anywhere from 5 to 10 or even 20 to 30 pipe diameters of straight pipe run upstream and downstream of the flow meter—depending on the flow sensing technology in use.

Flow Straightening and Conditioning


While the simple solution is to know your flow meter and its straight pipe run requirements to achieve accurate, consistent measurement, this is often easier said than done. Today’s complex and ever changing industrial processes, the need to treat and conserve water, crowded plant environments where real estate is precious, regulatory requirements and the team involved in running any plant can mean that your valve or elbow inevitably intrudes on your flow meter’s turf. Many times the first sign of the problem is when the flow meter isn’t reading the flow accurately. By then changing the pipeline layout or moving other devices such as valves is impractical and too costly.

Flow straighteners and conditioners offer an answer to this problem. There are several different types of flow straighteners and conditioners, including perforated plates, tube bundles, etc. The purpose of all flow straighteners and conditioners is to eliminate swirl and provide a stable velocity flow profile. Of course the ideal time to think about flow conditioning is before the flow meter is installed so that the flow conditioner and flow meter can be calibrated to work together. One drawback to add-on flow conditioners and straighteners is that they increase head loss.

Flow Meters With Built-In Conditioning


Another solution to consider is the installation of a flow meter with built-in flow conditioning. This type of solution offers the advantages of installation flexibility, reduced equipment, simplified installation with potentially fewer pipe penetrations and reduced maintenance requirements. Several manufacturers offer flow meters that include built-in flow conditioning. For example, McCrometer’s V-Cone Flow Meter is a differential-pressure sensing meter with integral flow conditioning that operates within liquids, gas or steam.

McCrometer’s V-Cone Flow Meter
McCrometer’s V-Cone Flow Meter
The V-Cone’s DP flow sensor conditions fluid flow to provide a stable flow profile that increases accuracy. The flow sensor‘s design features a centrally-located cone inside a tube. The cone interacts with the fluid flow and reshapes the velocity profile to create a lower pressure region immediately downstream. The pressure difference, which is exhibited between the static line pressure and the low pressure created downstream of the cone, can be measured via two pressure sensing taps. One tap is placed slightly upstream of the cone and the other is located in the downstream face of the cone itself. The pressure difference can then be incorporated into a derivation of the Bernoulli equation to determine the fluid flow rate.

The cone’s central position in the line optimizes the velocity of the liquid flow at the point of measurement. It forms very short vortices as the flow passes the cone. These short vortices create a low amplitude, high frequency signal for excellent signal stability. The result is a highly stable flow profile for measurement accuracy to +0.5% with +0.1% repeatability over a wide flow range of 10:1. All of this is possible with a minimal straight pipe run of 0 to 3 diameters upstream and 0 to 1 diameters downstream from the flow meter depending upon placement from valves and other control devices.

Conclusions


Getting accurate flow measurement with valves, pumps, and other equipment in relatively close proximity is difficult, but achievable. The ideal way to achieve accurate and repeatable flow measurement within industrial water and wastewater applications is to recognize in advance the straight pipe run requirements of the flow sensing technology in use at your plant. When the process, the plant layout or other factors lead to swirl in your pipeline that affects meter performance, then consider either flow conditioners or a flow meter with built-in flow conditioning.

Attribution: Original white paper written by Jim Panek, Product Manager, Water & Wastewater, McCrometer, Inc.

Control Valve Glossary

Reprinted with permission of Cashco.
Linear Control Valve Design
Click for larger view.
Actuator: An actuator is a pneumatic hydraulic, or electrically powered device which supplies force and motion to open or close a valve.

Airset: A regulator which is used to control the supply pressure to the valve actuator and its auxiliaries.

Angle valve: A valve design in which one port is collinear with the valve stem or actuator, and the other port is at a right angle to the valve stem.

Anti-cavitation trim: See “trim, anti-cavitation”. Anti-noise trim: See “trim, anti-noise”.

Bellows stem seal: A thin wall, convoluted, flexible component that makes a seal between the stem and bonnet or body and allows stem motion while maintaining a hermetic seal.

Benchset: The calibration of the actuator spring range of a control valve, to account for the in service process forces.

Body: The main pressure boundary of the valve that also provides the pipe connecting ends, the fluid flow passageway, and supports the seating surfaces and the valve closure member.

Bonnet: The portion of the valve that contains the packing box and stem seal and may guide the stem. It may also provide the principal opening to the body cavity for assembly of internal parts or be an integral part of the valve body. It may also provide for the attachment of the actuator to the valve body. Typical bonnets are bolted, threaded, welded to, pressure-sealed, or integral with the body.

Butterfly valve: A valve with a circular body and a rotary motion disk closure member, pivotally supported by its shaft.

Rotary Control Valve Design
Click for larger view.
Cage: A part of a valve trim that surrounds the closure member and may provide flowcharacterization and/ or a seating surface. It may also provide stability, guiding, balance, and alignment, and facilitate assembly of other parts of the valve trim.

Capacity: The rate of flow through a valve under stated conditions.

Cavitation: A two-stage phenomenon of liquid flow. The first stage is the formation of vapor bubbles
within liquid system due to static pressure of fluid at vena contracta falling below the fluid vapor pressure; the second stage is the collapse or implosion of these cavities back into an all-liquid state as the fluid decelerates and static pressure is recovered.

Characteristic, flow: An indefinite term, see “characteristic, inherent flow” and “characteristic, installed flow.”

Characteristic, equal percentage: An inherent flow characteristic which, for equal increments of rated travel, will ideally give equal percentage changes of the existing flow coefficient (cv).

Characteristic, inherent: The relationship between the flow coefficient (cv) and the closure member travel as it is moved from the closed position to rated travel with constant pressure drop across the valve.

Characteristic, linear: An inherent flow characteristic that can be represented by a straight line on a rectangular plot of flow coefficient (cv) versus rated travel. Therefore, equal increments of travel provide equal increments of flow coefficient (cv).

Characteristic, quick opening: An inherent flow characteristic in which a maximum flow coefficient is achieved with minimal closure member travel.

Characterized cam: A component in a valve positioner used to relate the closure member position to the control signal.

Characterized trim: Control valve trim that provides predefined flow characteristics.

Closure member: The movable part of the valve that is positioned in the flow path to modify the rate of flow through the valve.

Closure member configurations (plug):
  • Characterized: Closure member with contoured surface, such as the “vee plug,” to provide various flow characteristics.
  • Cylindrical: A cylindrical closure member with a flow passage through it (or a partial cylinder).
  • Eccentric: Closure member face is not concentric with the stem centerline and moves into seat when closing.
  • Eccentric spherical disk: Disk is spherical segment, not concentric with the disk stem.
  • Linear: A closure member that moves in a line perpendicular to the seating plane.
  • Rotary: A closure member which is rotated into or away from a seat to modulate flow.
Coefficient, flow: A constant (cv) related to the geometry of a valve, for a given valve travel, that can be used to predict flow rate.

Control valve: A valve which controls the flow rate or flow direction in a fluid system. The final control element, through which a fluid passes, that adjusts the flow passage as directed by a signal from a cont- roller to modify the flow rate.

Dual sealing valve: A valve that uses a resilient seating material for the primary seal and a metal-to-metal seat for a secondary seal.

End connection: The configuration provided to make a joint with the pipe.
  • End connections, flanged: Valve body with end connections incorporating flanges that mate with corresponding flanges on the piping.
  • End connections, split clamp: Valve end connections of various proprietary designs using split clamps to apply gasket or mating surface loading.
  • End connections, threaded: Valve end connections incorporating threads, either male or female.
  • End connections, welded: Valve end connections which have been prepared for welding to the line pipe or other fittings. May be butt weld (bw), or socket weld (sw).
Erosion resistant trim: Valve trim, that has been designed with special surface materials or geometry to resist the erosive effects of the controlled fluid flow.

Extension bonnet: A bonnet with a packing box that is extended above the bonnet joint of the valve body so as to maintain the temperature of the packing above or below the temperature of the process fluid. The length of the extension bonnet is dependent upon the difference between the fluid temperature and the packing design temperature limit as well as upon the valve body design.

Face to face dimension: The dimension from the face of the inlet opening to the face of the outlet opening of a valve or fitting.

Facing, flange: The finish on the end connection that mates with gasket surfaces.

Failure mode: The position to which the valve closure member moves when the actuating energy source fails.
  • Fail-closed: A condition wherein the valve closure member moves to a closed position when the actuating energy source fails.
  • Fail-in place: A condition wherein the valve closure member stays in its last position when the actuat- ing energy source fails.
  • Fail-open: A condition wherein the valve closure member moves to an open position when the actuat- ing energy source fails.
  • Fail-safe: A characteristic of a particular valve and its actuator, which upon loss of actuating energy supply, will cause a valve closure member to fully close, fully open or remain in fixed last position. Fail-safe action may involve the use of auxiliary controls connected to the actuator.
Flangeless control valve: A valve without integral line flanges, which is installed by bolting between companion flanges, with a set of bolts, or studs, generally extending through the companion flanges.

Guides, closure component: The means by which the closure is aligned with the seat and held stable throughout its travel. The guide is held rigidly in the body, bonnet, and/or bottom plate.

Hand jack: A manual override device, using a lever, to stroke a valve or to limit its travel.

Handwheel: A mechanical manual override device, using a rotary wheel, to stroke a valve or to limit its travel.

Hard facing: A material applied to valve internals to resist fluid erosion and/or to reduce the chance of galling between moving parts, particularly at high temperatures.

Hard plating: A thin metal deposit, sometimes electroplated, used to induce surface hardening. Hard plating is many orders of magnitude thinner than hard facing.

Hysteresis: The maximum difference in output value for any single input value during a calibration cycle, excluding errors due to dead band.

Integral seat: A flow control orifice and seat that is an integral part of the body or cage.

Jacketed valves: A valve body cast with a double wall or provided with a double wall by welding material around the body so as to form a passage for a heating or cooling medium. Also refers to valves which are enclosed in split metal jackets having internal heat passageways or electric heaters. Also referred to as “steam jacketed” or “vacuum jacketed.” in a vacuum jacketed valve, a vacuum is created in the space between the body and secondary outer wall to reduce the transfer of heat by convection from the atmosphere to the internal process fluid, usually cryogenic.

Lantern ring: A rigid spacer assembled in the packing box with packing normally above and below it and designed to allow lubrication of the packing or access for a leak-off connection.

Lapping-in: A process of mating contact surfaces by grinding and/or polishing.

Leakage, class: Classifications established by ansi b16.104 to categorize seat leakage tolerances for different sizes of control valve trim.

Leakage, seat: The quantity of fluid passing through a valve when the valve is in the fully closed position with pressure differential and temperature as specified.

Leak-off gland: A packing box with packing above and below the lantern ring so as to provide a collection point for fluid leaking past the primary seal (lower packing).

Lined valve body: A valve body in which a coating or liner has been applied to internal surfaces for cor- rosion/erosion protection or for flow shut off.

Liner, slip-in: An annular shaped liner which makes a slight interference fit with the body bore and which may be readily forced into position through the body end. May be plain or reinforced. Applies to butterfly valves.

Liquid pressure recovery factor: The ratio (fl) of the valve flow coefficient (cv) based on the pressure drop at the vena contracta, to the usual valve flow coefficient (cv) which is based on the overall pressure drop across the valve in non-vaporizing liquid service. These coefficients compare with the orifice metering coefficients of discharge for vena contracta taps and pipe taps, respectively. See ansi/isa-s75.01 “control valve sizing equations.”

Lubricator isolating valve: A manually operated valve used to isolate the packing lubricator assembly from the packing box.

Lubricator packing box: A packing arrangement consisting of a lantern ring with packing rings above and below with provision to lubricate the packing.

Mechanical limit stop: A mechanical device to limit the valve stem travel.

Mounting position: The location and orientation of an actuator or auxiliary component relative to the control valve. This can apply to the control valve itself relative to the piping.

Multiple orifice: A style of valve trim where the flow passes through a multiple of orifices in parallel or in series.

Nominal size: A numerical designation of size which is common to all components in a piping system other than components designated by outside diameters or by thread size. It is a convenient round number for reference purposes and is only loosely related to manufacturing dimensions. Iso uses initials dn as an abbreviation for the term with the letters dn followed by a numerical value designating size. All equipment of the same nominal size and nominal pressure rating shall have the same mating dimensions appropriate to the type of end connections.

Packing: A sealing system consisting of deformable material contained in a packing box which usually has an adjustable compression means to obtain or maintain an effective seal.

Packing box: The chamber, in the bonnet, surrounding the stem and containing packing and other stem sealing parts.

Packing flange: A device that transfers the deforming mechanical load to the packing follower.

Packing follower: A part which transfers the deforming mechanical load to the packing from the packing flange or nut.

Packing lubricator assembly: A device for injection of lubricant/sealer into a lubricator packing box.

Pinch or clamp valve: A valve consisting of a flexible elastomeric tubular member connected to two rigid flow path ends whereby modulation and/or shut off of flow is accomplished by squeezing the flexible member into eventual tight sealing contact.

Plug: A term frequently used to refer to the closure member.

Plug valve: A rotary motion valve with a closure member that may be cylindrical or conical. Port: The flow control orifice of a control valve.

Port guiding: A valve closure member with wings or a skirt fitting into the seat ring bore.

Positioner: A position controller, which is mechanically connected to a moving part of a final control element or its actuator, and automatically adjusts its output pressure to the actuator in order to maintain a desired position that bears a predetermined relationship to the input signal. The positioner can be used to modify the action of the valve (reversing positioner), extend the stroke/controller.

Positioner, double acting: A positioner with two outputs, suited to a double acting actuator.

Positioner, single acting: A positioner with one output, suited to a spring opposed actuator.

Position switch: A position switch is a pneumatic, hydraulic or electrical device which is linked to the valve stem to detect a single, preset valve stem position.

Position transmitter: The position transmitter is a device that is mechanically connected to the valve stem or shaft and generates and transmits a pneumatic or electrical signal representing the valve position.

Post guiding: A design using guide bushing or bushings fitted into the bonnet or body to guide the plug’s post.

Pressure energized seal: A seal energized by differential pressure.

Rangeability inherent: The ratio of the largest flow coefficient (cv) to the smallest flow coefficient (cv) within which the deviation from the specified inherent flow characteristic does not exceed the stated limits.

Rated travel: The amount of movement of the valve closure member from the closed position to the rated full open position.

Seat: The area of contact between the closure component and its mating surface which establishes valve shut-off.

Seat ring: A part of the valve body assembly that provides a seating surface for the closure member and may provide part of the flow control orifice.

Shaft: The mechanical member used to support a rotary closure member.

Spring rate: The force change per unit change in length of a spring.

Stem connector: The device which connects the actuator stem to the valve stem. Stem guide: A guide bushing closely fitted to the valve stem and aligned with the seat.

Three-way valve: A valve with three end connections, used for mixing or diverting flow.

Throttling: The action of a control valve to regulate fluid flow by varying the position of the closure member. This service generates a variable pressure drop.

Transducer: A device that is actuated by power from one system and supplies power in another form to a second system.

Travel: The movement of the closure member from the closed position to an intermediate or rated full open position.

Travel indicator: A pointer and scale used to externally show the position of the closure member; typically in terms of units of opening percent of travel or degrees of rotation.

Trim: The internal components of a valve which modulate the flow of the controlled fluid.
  • Trim, anti-cavitation: A combination of control valve trim that by its geometry reduces the tendency of the controlled liquid to cavitate.
  • Trim, anti-noise: A combination of control valve trim that by its geometry reduces the noise generated by fluid flowing through the valve.
  • Trim, balanced: Control valve trim designed to minimize the net static and dynamic fluid flow forces acting on the trim.
  • Trim, reduced: Control valve trim which has a flow area smaller than the full flow area for that valve. Trim, soft seated: Valve trim with an elastomeric, plastic or other readily deformable material used
  • either in the closure component or seat ring to provide tight shutoff with minimal actuator forces.
Unbalance, dynamic: The net force/torque produced on the valve stem/shaft by fluid pressure acting on the closure member and stem/shaft at stated travel and flowing conditions.

Unbalance, static: The net force produced on the valve stem by the fluid pressure acting on the closure member and stem with the fluid at rest and with stated pressure conditions.

Valve: A device used for the control of fluid flow, consisting of a fluid retaining assembly, one or more ports between end openings and a movable closure member which opens, restricts or closes the port(s).
  • Balve, ball: A valve with a rotary motion closure member consisting of a full ball or a segmented ball.
  • Valve, diaphragm type: A valve with a flexible linear motion closure member which is moved into the
  • fluid flow passageway of the body to modify the rate of flow through the valve by the actuator.
  • Valve, floating ball: A valve with a full ball positioned within the valve that contacts either of two seat rings and is free to move toward the seat ring opposite the pressure source when in the closed position to effect tight shutoff.
  • Valve, globe: A valve with a linear motion closure member, one or more ports and a body distinguished by a globular shaped cavity around the port region.
Vena contracta: The location in a flow stream where fluid velocity is at its maximum and fluid static pressure and the cross-sectional area are at their minimum. In a control valve, the vena contracta normally occurs just downstream of the actual physical restriction.

Yoke: The structure which rigidly connects the actuator power unit to the valve.

Glossary courtesy of Cashco, Inc. For more information about Cashco products, contact Miller Energy, Inc. Call them at 800-631-5454 or visit their web site at https://millerenergy.com.

How Do Magnetic Level Indicators Work?

Magnetic Level IndicatorMagnetic Level Indicators also known as MLIs, have revolutionized the global visual indication market by offering a safer, reliable, and high-visibility alternative to common gauge glass assemblies.  They provide high-visibility representation of the liquid level in a vessel. MLIs can be mounted to tanks in a number of different ways. The most popular configuration, however, is called a side-mount.

The Magnetic Level Indicator (MLI) working principle is widely used in many industrial level applications. The operating principle behind a magnetic level indicator is that the MLI shares the same process fluid as the vessel, and therefore shares the same level.

The three primary components to a Magnetic Level Indicator are:
  • The float
  • The chamber
  • The visual indicator

Magnetic Level IndicatorThe float (contained within the chamber) interacts with the externally mounted visual indicator. As liquid rises and falls in the vessel and MLI chamber, the float follows. The magnets in the float interact with magnets inside each indicator flag. As the float rises and falls in the chamber, the magnets slowly turn each flag 180 degrees. This allows the visible flag color to change to a high-contrasting, highly-visible representation of liquid level.



Magnetic Level Indicator



Utilizing a combination of proven buoyancy principles along with the benefits magnetism, MLIs can be customized to fit virtually any process connection arrangement on the vessel.

The chamber and magnetic float is available in a variety of materials and pressure ratings to accommodate the wide variety of complex process applications present in the world’s major industrial facilities.

Areas Where Magnetic Level Indicator Are Applied:

  • Feed water heaters and boilers
  • Refinery and chemical industries
  • Energy and power plant technology
  • Pulp and paper applications
  • Oil and gas industries
  • Gas plants
  • Pipeline compressor applications
  • Pharmaceutical applications
  • Food and beverage applications

For more information about Magnetic Level Indicators (MLI's), contact Miller Energy by calling 800-631-5454 or visit their web site at https://millerenergy.com.

Installing the ASCO 212 Series Composite Valve Using the FasN Connection System


The ASCO series 212 composite valve is intended for use in applications for water purification and water treatment, especially in the implementation of the membrane-based filtration. The composite valve series 212 is perfect for use in mid-size Reverse Osmosis Systems apps requiring lead-free and NSF-approved construction. The series 212 composite valves are available in 3/8", 1/2", 3/4", and 1" pipe sizes rated for pressures up to 150 PSIG and 180 degrees F.

The video above demonstrates how to install the series 212 using the patented ASCO FasN system for NPT threaded connections, turn and lock connections, and solvent bond connections.

For more information, contact Miller Energy Inc. by calling 800-631-5454 or visit their web site at https://millerenergy.com.

Refractometry in Oil Refining and the Petrochemical Industry: Sulfuric Acid Alkylation

Refractometers Used in Sulfuric Acid Alkylation

SULFURIC ACID, H2SO4
Typical end products

  • Alkylate (premium higher-octane gasoline blending stock for motor fuel and aviation gasoline).
Chemical curve: Sulfuric acid 88-100 R.I. per Conc wt.-% at Ref. Temp. of 20 ̊C

Refractometers Used in Sulfuric Acid Alkylation



Introduction

Motor fuel alkylation using sulfuric acid (H2SO4) or liquid hydrofluoric acid (HF) is one of the oldest catalytic processes used in petroleum refining. The purpose of the alkylation is to improve motor and aviation gasoline properties (higher octane) with up to 90 % lower emissions compared to conventional fuel usage.

The problem with HF is that the catalyst forms a hazardous air pollutant when released as a superheated liquid, while H2SO4 does not. Therefore nearly 90 % of all alky units built since 1990 have adopted the H2SO4 technology. 

The leading alkylation unit licensor, with a 90 % share of the market, is DuPont (Stratco®). Another licensor is EMRE (Exxon Mobile Research Engineering, formerly K.W. Kellogg).

Application

In the process, isobutane is alkylated with low molecular weight olefins (propylene, butylene and pentylene) in the presence of a strong acid catalyst to form alkylate (the premium higher-octane gasoline blending stock). The catalyst (sulfuric acid) allows the two-phase reaction to be carried out at moderate temperatures. The phases separate spontaneously, so the acid phase is vigorously mixed with the hydrocarbon phase to form higher molecular weight isoparaffinic compounds.

After the reactor, the mixture enters a separation vessel where the acid and hydrocarbon separate. The acid is then recycled back to the reactor.

Instrumentation and installation

Refractometers Used in Sulfuric Acid AlkylationThe K-Patents Process Refractometer PR-43-GP is installed after the settlers to continuously monitor in real-time the concentration of acid in the process.

The concentration of sulfuric acid is critical to achieve the complete consumption of isobutane. A highly variable concentration of isobutane in the feedstock upsets the sulfuric acid content in the process.

It is important to determine the proper quantity of acid that will be fed into the process. This is achieved by combining routine sample titration analysis with continuous acid monitoring by the K-Patents Process Refractometer. Real-time measurements reduce the need for sampling and laboratory analyses that cause delay in the implementation of any necessary adjustments to the acid flow.

Continuous monitoring removes the uncertainty involved between titration measurements. The K-Patents refractometer will indicate any gradual fluctuations in the acid flow, allowing precise control over efficient acid consumption and resulting in cost savings. It is also useful in preventing acid runaway, an unwanted situation commonly described as wild acid.

Acid runaway may happen when the acid strength drops below 85-87 % H2SO4. As a result, the reactions between olefins and isobutane turn into reactions of olefins only, producing polymers known as acid sludge, ASO or red oil.

The K-Patents refractometer is not affected by acid soluble oil (ASO). The refractometer indicates actual acid strength regardless of the amount of hydrocarbons present, which is essential when transferring acid emulsion. It is also an extremely useful tool in real-time process acid strength measurement during agitated conditions.

The initial acid concentration is typically 85-100 % and the temperature is 15 °C (59 °F). The benefits of the K-Patents refractometer’s continuous monitoring system include substantial cost savings due to reduced acid consumption, and smooth alkylate production without acid runaways.

The K-Patents Process Refractometer System for Alkylation Acid Measurement Consists of:

  1. The K-Patents Process Refractometer PR-43 for hazardous locations in Zone 2. or The K-Patents PR-43 Intrinsically Safe model for installations in hazardous locations up to Zone 0.
  2. Optional parts:
    1. Different flow cell options for easy sensor installation
    2. EXd enclosure for easy isolator and transmitter mounting
    3. Parts for a start up
    4. Spare parts supplied for two years of operation
    5. Start-up and commissioning service
  3. User specified tests and documentation.

Alloy C-276/ASTM C276 should be considered as wetted parts material when the acid piping flow velocity is at a maximum of 6 m/s (20 ft/s). Alloy 20 can be considered when acid piping flow velocity is at a maximum of 1.8 m/s (6 ft/s). However, it is the responsibility of the end-user to specify the appropriate material, ensuring that it is satisfactory for the intended operating requirements.

Non-sparking incentive (Ex nA) and intrinsic safety (Ex ia) approvals are available for hazardous area installations.

Always consult an applications expert with any process-critical instrumentation application. By doing so, you will ensure a successful, safe, and efficient deployment.

Miller Energy, Inc.
https://millerenergy.com
800-631-5454

Reprinted with permission from K-Patents.

Hazardous Areas: Division and Zone Classification System

Hazardous area
Hazards areas are associated with flammable
vapors or gases, ignitable fibers, and combustible dusts.
Hazardous areas refer to locations with a possible risk of explosion or fire due to dangerous atmosphere. The hazards can be associated with flammable vapors or gases, ignitable fibers, and combustible dusts.

Different hazardous area classifications exist in the North America and Europe. Generally, the National Electric Code (NEC) classifications govern hazardous areas in the US. While in Europe, hazardous area classification has been specified by the International Electrotechnical Commission (IEC).

Below is a description of the Division and Zone classification system.



CLASS
NATURE OF HAZARDOUS MATERIAL
CLASS I
Hazardous area due the presence of flammable vapors or gases in sufficient quantities to produce ignitable mixtures and cause an explosion.
Examples include natural gas and liquified petroleum.
CLASS II
Hazardous area due the presence of conductive or combustible dusts in sufficient quantities to produce ignitable mixtures and cause an explosion.
Examples include aluminum and magnesium powders.
CLASS III
Hazardous area due the presence of flammable fibers or other flying debris that collect around lighting fixtures, machinery, and other areas in sufficient quantities to produce ignitable mixtures and cause an explosion.
Examples include sawdust and flyings



Division groups hazardous areas based on the chances of an explosion due to the presence of flammable materials in the area.

DIVISION
LIKELIHOOD OF HAZARDOUS MATERIAL
DIVISION 1
Areas where there is a high chance of an explosion due to hazardous material that is present periodically, intermittently, or continuously under normal operation.
DIVISION 2
Areas where there is a low chance of an explosion under normal operation.


Group categorizes areas based on the type of flammable or ignitable materials in the environment. As per NEC guidelines, Groups A to D classify gasses while Groups E to G classify dust and flying debris.
GROUP
TYPE OF HAZARDOUS MATERIAL IN THE AREA
GROUP A
Acetylene.
GROUP B
Area contains flammable gas, liquid, or liquid produced vapor with any of the following characteristics:
  • Minimum Ignition Current (MIC) value equal to or less than 0.40
  • Maximum Experimental Safe Gap (MESG) value equal to or less than 0.45 mm
  • Combustible gas with more than 30 percent volume
Examples include hydrogen, ethylene oxide, acrolein, propylene oxide.

GROUP C
Area contains flammable gas, liquid, or liquid produced vapor with any of the following characteristics:
  • Minimum Ignition Current (MIC) value between 0.40 and 0.80
  • Maximum Experimental Safe Gap (MESG) value greater than 0.75 mm
Examples include carbon monoxide, hydrogen sulphide, ether, cyclopropane, morphline, acetaldehyde, isoprene, and ethylene.

GROUP D
Area contains flammable gas, liquid, or liquid produced vapor with any of the following characteristics:
  • Minimum Ignition Current (MIC) value greater than 0.80
  • Maximum Experimental Safe Gap (MESG) value greater than 0.75 mm
Examples include ammonia, gasoline, butane, benzene, hexane, ethanol, methane, methanol, natural gas, propane, naphtha, and vinyl chloride.

GROUP E
Area contains metal dusts such as magnesium, aluminum, chromium, bronze, titanium, zinc, and other combustible dusts whose abrasiveness, size, and conductivity present a hazard.

GROUP F
Area contains carbonaceous dusts such as charcoal, coal black, carbon black, coke dusts and others that present an explosion hazard.
GROUP G
Area contains combustible dusts not classified in Groups E and F.
Examples include starch, grain, flour, wood, plastic, sugar, and chemicals.


NOTE: This post serves only as a guide to acquaint the reader with hazardous area classifications in the USA. It is imperative to discuss your instrumentation, valve, or process equipment requirement with a qualified applications expert prior to installing any electrical device inside of any hazardous area.


6 Benefits of Using Wireless Networking Systems in Industrial Applications

Wireless Networking Systems in Industrial ApplicationsWireless technologies offer great value over wired solutions. A reduction in cost is just one of the many benefits of switching to the wireless networking system. There are many benefits, including enhanced management of legacy systems that were previously not possible with a wired networking connection.

Here is an overview of some of the value-added benefits of adopting wireless networking in industrial plants.
  1. Reduced Installation Costs - Savings in installation costs is the key benefit of a wireless networking system. The cost of installing a wireless solution is significantly lower as compared to its wired counterpart. Installing a wireless network requires less planning. Extensive surveys are not required to route the wires to control rooms. This reduced installation cost is the main reason industrial setups should consider going wireless instead of having a wired networking system. 
  2. Improved Information Accuracy - Adopting wireless networking also results in improved accuracy of information. The wireless system is not prone to interferences. As a result, the system ensures consistent and timely transfer of information from one node to another. 
  3. Enhanced Flexibility - Enhanced flexibility is another reason for deploying wireless networking solutions in an industrial setting. Additional points can be awarded easily in an incremental manner. The wireless system can also integrate with legacy systems without any issues. 
  4. Operational Efficiencies - Migrating to wireless networking can help in improving operational efficiencies as well. Plant managers can troubleshoot and diagnose issues more easily. The system facilitates predictive maintenance by allowing the monitoring of remote assets. 
  5. Human Safety - Another critical factor that should influence the decision to migrate to wireless networking is the human safety factor. Wireless technologies allow safer operations, reducing exposure to harmful environments. For instance, a wireless system can be used in taking a reading and adjusting valves without having to go to the problematic area to take measurements. With wireless networking systems, readings can be taken more frequently that can help in early detection and reduction of possible incidents. 
  6. Efficient Information Transfer - Another advantage is that the time required to reach a device is reduced. This results in a more efficient transfer of information between network segments that are geographically separated. The industry wireless networking standards use IP addresses to allow remote access to data from field devices. 

For more information on wireless technologies in industrial settings, contact Miller Energy by visiting https://millerenergy.com or by calling 800-631-5454.

Understanding How Flame Arresters Work


Flame Arrester
A Flame Arrester (or arrestor) is a passive devices with no moving parts, that allows hot gas to pass through, but stops a flame in order to prevent a larger fire or explosion.  Flame Arresters uses a wound metal ribbon type element that prevents the spread of flame from the exposed side of the arrester to the protected side of the arrester. The metal element's construction provides a matrix of engineered openings that are carefully calculated and sized to quench the flame by absorbing the flame's heat. As an explosion flame travels through a narrow metal space, heat is transmitted to the walls, energy is lost and only vapor gasses are able to pass through. Flame Arresters are used in many industries chemical, petrochemical, pulp and paper, refining, pharmaceutical, mining, power generation, and wastewater treatment.

Cashco Flame Arresters are specifically engineered to match the explosive mixtures Maximum Experimental Safe Gap, in order to ensure complete extinction of the flame. At the heart of each Cashco flame arrestor lies filter discs that consists of wound, smooth and channeled strips of stainless steel set at specific maximum experimental stage gaps the smaller the gaps are which the flame travels the more heat and energy is lost therefore the filters gap width and gap length are specifically engineered to match the explosive mixture in order to ensure complete extinction of the flame. 

To learn more about Cashco flame arrestors, contact Miller Energy, Inc. by calling 908-755-6700 or by visiting https://millerenergy.com.


Interface in the Field: Achieving Reliable Interface Measurement to Optimize Process and Increase Uptime

Interface or multiphase level measurements exist throughout the Oil & Gas streams as well as Petrochemical. While level measurement technologies have come a long way in effectively measuring liquids and solids, multiphase level measurement continues to be the biggest challenge and opportunity that exists today to which there is no perfect technology.

However, experience has shown that process optimization and increased uptime can still be achieved in many separator applications through reliable, best-in-class, level technology.

The objective of this paper is to review interface challenges, the current technologies being utilized for interface, field experience in various applications to achieve process optimization and increased uptime, and the future of reliable interface measurement.

DOWNLOAD THE TECHNICAL PAPER HERE

Courtesy of Magnetrol and Miller Energy, Inc.
https://millerenergy.com
800-631-5454

The Magnetrol ECHOTEL 962 Dual Ultrasonic Level Control


The Magnetrol ECHOTEL Model 962 is a dual point switch that can be used as a level controller, or to control pumps in an auto fill or auto empty mode. The tip sensitive lower gap performs well in aerated or foamy liquids, and can measure to within 1.4" of the vessel bottom. The rigidity of the unique flow-through upper gap allows separations of up to 125" (318 cm) between the upper and lower transducer gaps.

The Magnetrol ECHOTEL 962 offers the ultimate solution to reliable dual point liquid level measurement. This advanced switch uses pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for use in Safety Integrity Level (SIL) 2 loops.

The ECHOTEL Model 962 is equipped with advanced diagnostics that continuously check the sensor and electronics. The diagnostics also alarm for electrical noise interference from external sources.

Ultrasonic contact switches use a pair of piezoelectric crystals that are encapsulated in epoxy at the tip of the transducer for level measurement. The crystals are made of a ceramic material that vibrates at a given frequency when subjected to an applied voltage. The transmit crystal converts the applied voltage from the electronics into an ultrasonic signal. When liquid is present in the gap, the receive crystal senses the ultrasonic signal from the transmit crystal and converts it back to an electrical signal.

Miller Energy, Inc.
https://millerenergy.com
800-631-5454